•  +91 9811209579
  • info@ssinstruments.com
  •  S.S. Instruments Pvt. Ltd.

       Material Testing Instruments
ISO 9001:2008 Certifited   


58
Conditioning Chamber (with Humidity)

Test Samples are required to condition at regulated temperature and humidity conditions before the actual test. The conditioning helps reduce the variation in results due to external environmental conditions. &

More

ESCR
Environmental Stress Cracking Test (ESCR)

The procedure of test for cracking due to environmental stresses on electric polyethylene insulation or sheath of cables Water Bath : Double Walled water bath : 15 x 15 x 18 (LBH in Inches) Temperature Con

More

Air-Oxygen-Pressure-Chamber
Air Oxygen Pressure Chamber (HMI / PLC Model)

The Instruments is used for heat Ageing test under oxygen air pressure for insulation & sheath of electric cables. This apparatus is also used for estimating the relative resistance of vulcanized rubber to

More

Two roll mill Digital
Two Roll Mill – Digital Temperature Controller

Two Roll Mill is used for mixing two or more compounds in a homogeneous mixture. This Mixture is then molded into samples for further testing. Salient Features       Model : SSI 511 TRPF

More

8 cell photo s
Ageing Oven 8 Cell

Thermoplastic and Poly vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of

More

loi photo s
Limiting Oxygen Index (HMI Model)

Critical limiting Oxygen Index apparatus is used for determining the minimum percentage of Oxygen required to just support flaming combustion of a material at room temperature in FTA mode or at Higher Temperat

More

Cold Chamber Vertical Model
Cold Chamber (Vertical Model)

When the Cables / Electrical Equipments are subjected top extreme cold for a considerable duration of time, they may become hardened and stiff. Such hardness and stiffness cause cracking of the insulation or sh

More

Cold Chamber Horizontal Model
Cold Chamber (Horizontal Model)

When the Cables / Electrical Equipment are subjected top extreme cold for a considerable duration of time, they may become hardened and stiff. Such hardness and stiffness cause cracking of the insulation or she

More

Cold Bend Test Apparatus as per IS
Cold Bend Test Apparatus (as per IS)

Cracks and deformation occur when the material is bend or wound under cold conditions. The apparatus is deigned to wound the cable samples on standardized mandrels under cold conditions.   Salient Featu

More

Cold Impact IS Model
Cold Impact Test Apparatus (as per IS)

Most materials when exposed to extreme cold over a period of time become hard and brittle. This test is designed to study the effect of cold temperatures on material under mechanical shock. Salient Feature Â

More

Hydraulic-Press
Hydraulic Press

Various standards for test of Plastics, Wires & Cables, and Polymer Compounds require test samples of specific shape and size for conducting test on different materials. Hydraulic Hot press is a basic appar

More

Carbon Content Test Apparatus
Carbon Content Test Apparatus

The test determines the content of Carbon Black in Polysthylene Insulation or sheath of electrical cables.     Salient Features       Model :  SSI 528 CCBS (Carbon Content Test Apparatus as

More

Glass Chimney for LOI
Glass Chimney For LOI Test Apparatus

Double walled Borosilicate Glass Chimney provides the ideal test environment for testing Limiting Oxygen Index for at both ambient as well as elevated temperature. Salient Features       G

More

Ageing Oven with HMI
Thermal Ageing Oven as per IEC & IS (with HMI)

Thermoplastic and Poly vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of

More

Smoke Density Test Apparatus as per ASTM with HMI
Smoke Density (ASTM) with HMI

Smoke Density Apparatus is used for measuring & observing the relative amount (Density) of smoke produced by the burning (combustion) or decomposition of Plastic, Cables etc. under controlled conditions.

More

45
Ultra Low Cold Chambers

When the Cables / Electrical Equipments are subjected top extreme cold for a considerable duration of time, they may become hardened and stiff. Such hardness and stiffness cause cracking of the insulation or sh

More

55
Hot Water Bath

SSI Hot Water Bath are designed to maintain uniform Temperature across the complete chamber and provide controlled enviroment for Heating, Curing, or testing various properties under elevated temperature of wat

More

Sample Die for LOI
Sample Die for Limiting Oxygen Index

Correct and accurate sample is necessary for result accuracy and repeatability. The Sample Die is designed to produce equal sized samples for testing Limiting oxygen Index Test Apparatus.   Salie

More

Hand Press Lever Type
Die Cutting Press (Hand Lever Model)

The Press is deigned to accept various types of Dumb Bell and Sample Dies for cutting the sample. Salient Features       Model : SSI 510 DPLT (Dumb Bell cutting press with lever type handle) Force A

More

Ageing Oven with IPC
Ageing Oven (IPC Model)

Thermal Ageing Test Instrument helps in study of Ageing Process on various material. Thermoplastic and Poly Vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. Th

More

Cold-Impact-as-per-IEC
Cold Impact Test as per IEC

Most materials when exposed to extreme cold over a period of time become hard and brittle. Cold Impact test is designed to study the effect of cold temperatures on material under mechanical shock.    

More

48
Dumb Bell Die

Dumb Bell is the most widely used shape for testing various samples for their physical and other properties.     Salient Features       Die Material :  Die Steel Overall Length :  75 mm,

More

54
Hot Air Oven

SSI Ovens are designed to maintain uniform Temperature across the complete chamber and provide controlled enviroment for Heating, Curing, Drying or testing various properties under elevated temperature.  

More

Limiting Oxygen Index
Limiting Oxygen Index

Limiting Oxygen Index / Critical Limiting Oxygen Index apparatus is used for determining the minimum percentage of Oxygen required to just support flaming combustion of a material at room temperature in FTA mod

More

Ageing Oven with HMI
Ageing Oven (HMI / PLC Control)

Thermoplastic and Electrometric substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of the s

More

LOI Digital Flowmeter
Limiting Oxygen Index (Digital Flow)

Critical limiting Oxygen Index apparatus is used for determining the minimum percentage of Oxygen required to just support flaming combustion of a material at room temperature in FTA mode or at Higher Temperatu

More

Vacuum Oven with Digital Vacuum Gauge Ex
Vacuum Oven with Digital Vacuum Controller

SSIPL vacuum ovens are required in almost every institution for drying, moisture removal by heating in vacuumed environment. Salient Features       Model : SSI 558 VOC (Vacuum Oven Cylindrical Model

More

Sample Die for Smoke Density
Sample die for Smoke Density

Correct and accurate sample is necessary for result accuracy and repeatability. The Sample Die is designed to produce equal sized samples for testing Smoke Density for any sample. Salient Feature  

More

Ageing Oven with Digital Flow indicator
Ageing Oven (with Digital Flow Sensor)

Thermoplastic and electrometric substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of the s

More

Toxicity instrument
Toxicity Test Apparatus

Any compound when burned emits a cocktail of gases, which are harmful to humans. The significant of these gases is increased if the area under fire is compact and can have serious effects on humans and other ma

More

Rubber Roller mill with water cooling
Two Roll Mill – Rubber Products

Lab Two Roll Mill is designed to mix / knead rubber based material where in heat is emitted on kneading. The rollers are cooled by circulating water inside the roller cavity for rapid and uniform cooling.

More

Ageing Oven as per IS
Thermal Ageing Oven as per IEC & IS

Thermoplastic and Poly vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of

More

Hand Press Fly Wheel Type
Die Cutting Hand Press (Fly Wheel Model)

The Press is deigned to accept various types of Dumb Bell and Sample Dies for cutting the sample.     Salient Features       Model : SSI 510 DPFW (Dumb Bell cutting press with Fly Wheel) F

More

Air-Oxygen
Air Oxygen Pressure Chamber

The Instruments is used for heat Ageing test under oxygen air pressure for insulation & sheath of electric cables. This apparatus is also used for estimating the relative resistance of vulcanized rubber to

More

Featured Product