The insulation material in a cable is used to isolate the conductor from one another and from ground, as well as provide the necessary mechanical strength. The fundamental requirement of the insulation in an el

Laboratory Hot Set Test Apparatus is designed to determine the elongation & permanent set of insulation of armored and unarmored single, twin, three , four and multi-core cross linked Polyethylene (XLPE) in

The procedure of test for cracking due to environmental stresses on electric polyethylene insulation or sheath of cables Water Bath : Double Walled water bath : 15 x 15 x 18 (LBH in Inches) Temperature Con

Smoke Density Apparatus is used for measuring & observing the relative amount (Density) of smoke produced by the burning (combustion) or decomposition of Plastic, Cables etc. under controlled conditions. 

Thermoplastic and Poly vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of

The Instruments is used for heat Ageing test under oxygen air pressure for insulation & sheath of electric cables. This apparatus is also used for estimating the relative resistance of vulcanized rubber to

For certain locations it may be important to use a cable which retards flame in case of fire and is self – extinguishing when the source of fire is removed. This test is carried out on finished cables to veri

Critical limiting Oxygen Index apparatus is used for determining the minimum percentage of Oxygen required to just support flaming combustion of a material at room temperature in FTA mode or at Higher Temperat

Compounds based on halogenated polymers and compounds containing halogenated additives emits harmful Halogen Acid Gas while burning. These gases are corrosive and can prove harmful to property and humans in cas

For certain locations it may be important to use a cable which retards flame in case of fire and is self – extinguishing when the source of fire is removed. This test is carried out on finished cables to veri

Thermoplastics and PVC  (Plasticized Polyvinyl Chloride) materials when exposed to continuous heat, degenerates and emit harmful acidic gases. The instrument is manufactured for testing PVC materials against t

This Test instrument is designed to covers a laboratory Procedure for testing of bunch cables mounted vertically to determine their relative ability to resist flame prorogation. The objective of the fire test i

For certain locations it may be important to use a cable which retards flame in case of fire and is self – extinguishing when the source of fire is removed. This test is carried out on finished cables to veri

Cracks and deformation occur when the material is bend or wound under cold conditions. The apparatus is deigned to wound the cable samples on standardized mandrels under cold conditions.   Salient Featu

Most materials when exposed to extreme cold over a period of time become hard and brittle. This test is designed to study the effect of cold temperatures on material under mechanical shock. Salient Feature Â

Thermoplastics and PVC materials when exposed to continuous heat tend to soften. In this condition when they are subjected to mechanical pressure, they have a tendency to deform at the location of pressure resu

The insulation material in a cable is used to isolate the conductor from one another and from ground, as well as provide the necessary mechanical strength. The fundamental requirement of the insulation in an el

The test determines the content of Carbon Black in Polysthylene Insulation or sheath of electrical cables.     Salient Features       Model :  SSI 528 CCBS (Carbon Content Test Apparatus as

Thermoplastics and PVC materials when exposed to continuous heat, degenerates and emit harmful acidic gases. The instrument is manufactured for testing PVC materials against their thermal stability at higher te

Thermoplastic and Poly vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of

The instrument is designed to test the current capacity of any wire by passing very high current through it.     Salient Features Current Capacity : 0 to 160 Amps Current Control : Using D

Copper Purity Apparatus is designed to determine the purity of copper by electrolysis method. The sample containing copper is dissolve in sulfuric -& nitric acid mixture and a regulated current is passed

Compounds based on halogenated polymers and compounds containing halogenated additives emits harmful Halogen Acid Gas while burning. These gases are corrosive and can prove harmful to property and humans in cas

Thermal Ageing Test Instrument helps in study of Ageing Process on various material. Thermoplastic and Poly Vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. Th

Dumb Bell is the most widely used shape for testing various samples for their physical and other properties.     Salient Features       Die Material :  Die Steel Overall Length :  75 mm,

The Test is designde to test the evpouration or fading of color when exposed to direct sunlight.   Salient Features Constrution :  Aluminum / Mild Steel Body with wooden / aycralic battens Top

During the armoring process and subsequently during laying of the cable, the armor wires are subjected to torsion stress.  The test is conducted to evaluate the torsion resistance of the wire. Salient Featu

SSIPL vacuum ovens are required in almost every institution for drying, moisture removal by heating in vacuumed environment. Salient Features       Model : SSI 558 VOC (Vacuum Oven Cylindrical Model

The ASTM test serves as a preliminary indication of Textile /  plastics material acceptability for use as part of a device or appliance with respect to its flammability. The material is kept vertical to the f

Laboratory Hot Set Test Apparatus is designed to determine the elongation & permanent set of insulation of armoured and unarmoured single, twin, three , four and multi-core cross linked Polyethylene (XLPE)

Thermoplastic and Poly vinyl Chloride substances when exposed to heat undergo many types of physical and chemical changes. The extent and type of change that takes place depends upon the severity of exposure of

Compounds based on halogenated polymers and compounds containing halogenated additives emits harmful Halogen Acid Gas while burning. These gases are corrosive and can prove harmful to property and humans in cas

Laboratory Hot Set Test Apparatus is designed to determine the elongation & permanent set of insulation of armored and unarmored single, twin, three , four and multi-core cross linked Polyethylene (XLPE) in

Thermoplastics and PVC  (Plasticized Polyvinyl Chloride) materials when exposed to continuous heat, degenerates and emit harmful acidic gases. The instrument is manufactured for testing PVC materials against t

The Instruments is used for heat Ageing test under oxygen air pressure for insulation & sheath of electric cables. This apparatus is also used for estimating the relative resistance of vulcanized rubber to